Need help?Do you have a question about the REVV Generator 120 MK3 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Number of Channels | 3 |
| Wattage | 120W |
| Master Volume | Yes |
| Power Output | 120W RMS |
| Effects | Reverb |
| EQ | 3-Band (Bass, Mid, Treble) |
| Effects Loop | Yes |
| Footswitch | Yes (Included) |
| Inputs | 1 x 1/4" |
| Speaker | None (Head Only) |
| Dimensions | 10.5" x 27.5" x 10" |
| Channels | Clean, Crunch, Lead |
Essential safety guidelines for operating the amplifier to prevent damage and injury.
Instructions for correctly connecting and powering on the amplifier for the first time.
Details on the input jack and controls for Channel One (Clean), including level and bright/wide functions.
Description of controls for the crunch channel, including EQ, drive modes, and bright/gain functions.
Explanation of gain, aggression levels, and EQ boosts for tone shaping.
Details on master volume, depth, presence, and reverb switch controls.
How to use the noise gate, its threshold control, and LED indicators for gate status.
Details on the Store switch and the Pre-Post switch for Two Notes Technology.
Using the headphone jack and virtual cabinet selector for different sounds.
Steps for Bluetooth pairing with the Torpedo Wireless Remote app.
Instructions for powering the amplifier on and off using the standby and power switches.
Details on main power, fuses, and bias test points on the rear panel.
Using balanced XLR outputs and the USB connector for software control.
Explanation of reverb level, gate threshold, wattage switch, internal load, and FX loop.
Connecting cabinet lighting and the footswitch for amplifier control.
Using MIDI for external control and connecting speaker cabinets with impedance matching.
Information on compatible power tube types (KT88, EL34, 6L6GC) and their sonic characteristics.
Details on preamp tubes (12AX7) and the process of adjusting power tube bias.
A chart of recommended bias set points and a step-by-step guide for setting the bias.
Steps for setting up MIDI control, including OMNI mode and manual channel selection.
How to set up and save amplifier configurations as MIDI program changes.
List of amplifier functions that can be controlled via MIDI program changes or CC commands.
Explanation of CC command usage and a table mapping functions to CC numbers.
Connecting the amplifier to the Torpedo Remote software via USB for settings manipulation.
Steps for Bluetooth pairing with the Torpedo Wireless Remote app and common troubleshooting tips.
How to use the internal reactive load for silent playing or when no speaker cabinet is connected.
Instructions on how to save custom channel settings and configurations for power-up.
Toggling between global settings for FX Loop/Masters and channel-specific saving.
Procedures for saving digital cabinets to banks or specific channels for recall.
How to disable cab save and perform a factory reset of amplifier settings.
Connecting the footswitch and switching between Control and Preset modes.
Detailed explanation of each footswitch button's function in Control Mode.
How to save presets to banks and reset the footswitch memory to factory defaults.
Using the mute function and compliance information for FCC and Industry Canada.
To Next Page
