REVV Generator 120 User Manual

Revv Owner’s Manual - 1
Owner’s Manual
the Generator 120

REVV Generator 120 Specifications

General

Brand	REVV
Model	Generator 120
Category	Amplifier
Language	English

Summary

Introduction to Revv Amplification

Important Safety Instructions and Warnings

Setting Up and Powering On the Amplifier

Front Panel Layout Overview

Guitar Input Jacks

Details the active and passive input jacks for connecting guitars to the amplifier.

Channel One: Clean Tone Settings

Channel Two: Crunch Tone Settings

Channel Three: Purple Gain Settings

Channel Four: Red Gain Settings

Master Volume Control Functions

Presence and Depth Tone Controls

Accessory Function Controls

Masters Switch Operation

Momentary switch to toggle between master volume 1 and 2; Red LED indicates master #2.

Mute Switch Operation

Silences the amplifier, acting as an alternative to the standby switch.

Serial FX Loop Switch Function

Store Switch for MIDI Programming

Standby and Power Switch Operation

Rear Panel Layout and Connections

Main Power Connection Guide

Instructions for connecting the amplifier to the mains power supply.

Power Tube Bias Test Points

Speaker Impedance and Output Jacks

Effects Loop Connections Guide

MIDI Input and Through Jacks

Explains the MIDI IN and MIDI THRU jacks for external control.

Footswitch Connection and Cable

Speaker Cabinet Lighting Feature

Information on connecting Revv speaker cabinets for illuminated logo features.

Serial Effects Loop Operation

Controlling the FX Loop On/Off

How to turn the effects loop on and off via the footswitch or panel.

Effects Loop Send Level Adjustment

Engaging and Bypassing the FX Loop

Methods for engaging or bypassing the effects loop within the signal path.

Connecting External Effects Units

Power Tubes and Tone Characteristics

Compatible Power Tube Types

Details compatible power tubes like KT88, EL34, and 6L6GC for tonal variety.

Power Tube Sockets and Mixing

Preamp Tube Types and Locations

Details the preamp tube types used (12AX7, 12AT7) and their locations.

Power Tube Bias Adjustment Guide

Introduction to biasing power tubes without removing the amplifier chassis.

Procedure to Set Power Tube Bias

Power Tube Bias Setting Chart

Chart providing safe ranges and recommended set points for different tube types.

MIDI Control Capabilities

OMNI Mode for MIDI Control

Explanation of OMNI mode for controlling functions on any MIDI channel.

Setting the MIDI Channel

Saving MIDI Program Changes

List of MIDI Controllable Functions

Continuous Controller Commands (CC)

Revv Footswitch Operation Modes

Footswitch Connection and Initialization

Instructions for connecting the footswitch and its initialization process.

Footswitch Control Mode Functions

Footswitch Preset Mode Usage

Footswitch Memory Reset Procedure

Muting the Amplifier with Footswitch

How to mute the amplifier using the footswitch, including LED indicators.

Amplifier Factory Default Reset

Technical Specifications

Lists the key technical specifications of the Revv Generator 120 amplifier.

Product Warranty Information