Revv Owner’s Manual - 7
Channel One (Clean)
Selected by: 1) pushing the designated front panel momentary toggle
switch up, 2) footswitch button #1 or a footswitch preset mode setting,
3) MIDI & CC commands.
Passive treble, middle, & bass controls with a wide range. Small turns =
large tonal change!
Level (volume) controls both volume.
Clean Bright allows you to achieve a brighter or warmer clean tone
without compromising the full range of your treble knob. This is also
useful when using gain pedals that are picky about which amp they are
boosting, so definitely experiment to taste.
Very clean (high headroom) & punchy. Takes pedals very well - or
decrease power to 10 watts for a more broken up sound with the
Output Power Switch. Channel output power is independent so you
can use this to control both tone & volume separately from all other
channels.
2.2
To Next Page
Loading...
