GB
6 register this product online at www.accobrands.com
To guard against injury the following basic safety precautions must be observed in the setup of this
product.
Ensure the machine is plugged into an easily accessible power outlet and ensure the cable is not
likely to trip up a passer by
Any attempt to repair this unit by unqualied personnel will invalidate the warranty Please return to
supplier
Unplug your shredder before moving it or when it is not in use for an extended period of time
Do NOT operate with a damaged power supply cord or plug after it malfunctions or after it has
been damaged in any manner
Do NOT overload electrical outlets beyond capacity as this can result in re or electrical shock
The socketoutlet should be installed near the equipment and shall be easily accessible
Do NOT alter the attachment plug The plug is congured for the appropriate electrical supply
Do NOT use near water
Do NOT use aerosol dusters or cleaners
Do NOT spray anything into the shredder
Do NOT load the autofeed chamber with unopened junk mail magazines bound documents etc
Although this shredder has been designed to comply with UL EN safety standards
including the probe accessibility tests do not operate the shredder near children or pets
autofeed technology
The Auto X has been designed to automatically shred up to sheets from the autofeed
chamber and up to sheets through the manual feed slot The autofeed mechanism has been
designed to handle paper fastened with staples and paper clips and to only pull a few sheets of
paper into the cutting mechanism to minimise the risk of paper jams
To Next Page
Loading...
