5
Note
The air inlet and outlet on the projector is strictly prohibited from being
blocked, so as to avoid damage to the projector caused by overheating
(not covered by the warranty)!
Power Button
1. Turn On: Connect the DC terminal of the power adapter to the DC-IN
port of the projector. When the indicator light turns red, press the
power button on the rear panel to turn it on.
2. Turn Off: Press the power button when the projector is on. When the
indicator light turns red from green, the projector is turned off.
Power On/Off
Hole for Stand (1/4 inch)
To Next Page
Loading...
