EasyManuals Logo

Rexnord Falk Quadrive A Mounting & Installation

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions
For non-standard mountings, modify drives as illustrated
below and on Page 2 to assure satisfactory lubrication. For
applications that exceed the limits shown, drives that are both
rotated AND tilted and drives with backstops, consult Factory.
CAUTION: Inadequate lubrication will cause damage.
When replacing a pipe plug (P) with a street elbow (E), insert
the plug in the elbow (E/P). When replacing a pipe plug (P)
with a street elbow (E), pipe nipple (N) and a pipe cap (C),
discard the pipe plug. Kits consist of parts for an oil expansion
chamber. Pipe fittings and kits tabulated on Page 2are
available from Rexnord. Pipe fittings may also be purchased
locally. Use galvanized pipe fittings.
Remove all pipe plugs and coat them and the added parts, with
Permatex #3 or equivalent to prevent leakage. Install parts as
illustrated to suit the mounting position. The air vent must be in
the top of the drive or in the kit standpipe. Fill drives with oil to
the level indicated by the letter “L in the following drawings.
Rexnord Industries, LLC, Gear Group 378-124
3001 W. Canal St., Milwaukee, WI 53208-4200 USA Telephone: 414-342-3131 June 2006
Fax: 414-937-4359 e-mail: info@rexnord.com web: www.rexnord.com Supersedes 8-98
Falk™ Quadrive
®
Shaft Mtd. Drives Model A
Non-Std. Mounting Installation
Sizes 5107-5315 (Page 1 of 2)
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
5107 = STD 5115 = .375 E/P
5203 & 5207 = KIT 0786775
5215 thru 5315 = KIT 0786776
5107 = STD
5115 = .375 E/P
5203 thru 5315 = STD
5107 = 5-12° STD
5107 = 13-20° .375 E/P
5115 = .375 E/P
5203 & 5207 = KIT 0786775
5215 thru 5315 = KIT 0786776
5107 = .375 E/P 5115 = .375 E/P
5203 & 5207 = KIT 0786775
5215 thru 5315 = KIT 0786776
5107 = KIT 0738540 5115 = STD
5203 = .375 E/C & .375 X 1.00N
5207 = .375 E/C & .375 X 2.00N
5215 = .500 E/C & .500 X 2.00N
5307 = .500 E/C & .500 X 2.50N
5315 = .500 E/C & .500 X 2.50N
5107 & 5115 = STD
5203 = .375 E/C & .375 X 1.00N
5207 = .375 E/C & .375 X 1.50N
5215 = .500 E/C & .500 X 1.12N
5307 & 5315 = .500 E/C & .500 X 2.00N
5107 = .375 E/C &
.375 X 3.00N
5115 = KIT 0786775
5203 = .375 E/C & .375 X 1.00N 1.50N
5207 = .375 E/C & .375 X 1.00N 1.50N
5215 = .500 E/C & .500 X 1.12N 1.50N
5307 = .500 E/C & .500 X 1.50N 2.00N
5315 = .500 E/C & .500 X 1.50N 2.00N
5107 & 5115 = KIT 0738540 5203 = .375 E/C & .375 X 1.50N
5207 = .375 E/C & .375 X 2.00N
5215 = .500 E/C & .500 X 2.00N
5307 = .500 E/C & .500 X 2.50N
5315 = .500 E/C & .500 X 2.50N
3 O’Clock CW Rotation
6 O’Clock CW Rotation
9 O’Clock CW Rotation
12 O’Clock CW Rotation
3 O’Clock CCW Rotation
6 O’Clock CCW Rotation
9 O’Clock CCW Rotation
12 O’Clock CCW Rotation
5 to 20° CW Rotation Sizes 5107 & 5115
10 to 20° CW Rotation Sizes 5203 thru 5315
5 to 20° CCW Rotation Sizes 5203 thru 5315
10 to 20° CCW Rotation Sizes 5107 & 5115
Standard Drive Mounting Limits
The standard drive rotation limits from the
basic 3, 6,9&12o’clock mounting
positions are shown at left. For higher limits,
follow the instructions at the left and the
drawings below. (6 o’clock illustrated)
CODE
B Bushing N Nipple
C Cap P Pipe Plug
E Street Elbow STD No Modifications
L Oil Level
Horizontal Drive Modifications 20° Max. Drive Rotation
10
MAX.
°
MAX.
ROTATION
(4107 & 4115)
MAX.
10°
MAX.
(4203 THRU 4315)
5-15° 16-20°

Other manuals for Rexnord Falk Quadrive A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rexnord Falk Quadrive A and is the answer not in the manual?

Rexnord Falk Quadrive A Specifications

General IconGeneral
BrandRexnord
ModelFalk Quadrive A
CategoryDC Drives
LanguageEnglish

Related product manuals