What to do if my Rexton BiCore C R-Li Hearing Aid does not work?
If your Rexton Hearing Aid isn't working, first, ensure it's turned on. If it still fails to operate, try recharging it. Also, be aware that the power-on delay might be active, so wait a few seconds before checking again. Finally, inspect and clean or replace the dome or wax protector.
How to fix weak sound on Rexton BiCore C R-Li?
If the sound from your Rexton Hearing Aid is weak, try increasing the volume. If that doesn't work, recharge the hearing aid. Another potential solution is to clean or exchange the dome or wax protector.
What to do if Rexton Hearing Aid sound is distorted?
If the sound from your Rexton Hearing Aid is distorted, attempt to decrease the volume. If the distortion continues, try recharging the hearing aid. Cleaning or replacing the dome or wax protector might also resolve the issue.
General| Model | BiCore C R-Li |
|---|---|
| Category | Hearing Aid |
| Battery Type | Rechargeable Lithium-ion |
| Wireless Connectivity | Yes |
| Bluetooth Streaming | Yes |
| Directional Microphones | Yes |
| Feedback Cancellation | Yes |
| Noise Reduction | Yes |
| Telecoil | Yes |
| Style | Receiver-in-Canal (RIC) |
| Battery Life | Up to 24 hours |
| Tinnitus Masker | Yes |
| Water Resistance | IP68 |
To Next Page
