RFX-RMR Issue 1.0 page 7 of 41
2 INTRODUCTION
This manual is to be used in conjunction with the RFX-RMR rack-mount switchable analog/digital
Receiver. When in digital mode the RFX-RMR offers significant features including ASI, SDI, composite
and component video outputs together with 4 audios (analog, AES digital). In analog mode the
receiver offers composite video and 2 audios.
The RF Central RFX-RMR is designed for permanent rack-mounted applications, such as ENG
truck/vehicle or fixed link applications. The Receiver comprises a 19” inch rack mount (2 ‘U’) unit that
contains both a digital and analog section, with common power supplies.
The digital section of the Receiver comprises a COFDM demodulator, video decoder, and audio
decoder. The analog section comprises an integral FM demodulator for one video channel with two
associated audio channels.
The RFX-RMR has a common RF input for both analog and digital receive modes, selection of mode
is via the front panel control push button selection and LCD display.
At the transmit site a range of RF Central analog/digital transmitters may be used. Examples include
the RFX-RMT switchable analog/digital rack mounted transmitter, the RFX-PHT 5 watt portable
transmitter or the RFX-CMT “Clip-On” camera mount transmitter. Please consult the separate manual
for information detailing the operation of transmitters.
To Next Page
