Installation
Connect the Supply to both units
Connect the permanent LIVE Feed and NEUTRAL supply.
Connect the Switched Input Lin
Connect the Switching Live input to Lin
When the Switched Live input (LIN) is ’LIVE’ the Red Lin will
illuminate, and the Lout at the other unit will then switch Live
out
Connecting the Switching Load Lout
Connect your LOAD to Lout
When the Switched Live Output (LOUT) is ’LIVE’ the Red L
OUT LED will illuminate
Multiple System Operation:
Each MAINSLINK-PRO system contains a unique identity so multiple systems can operate within
the same area without interfering with each other.
COMMS LED
ON One Flash Two Flashes 3 Flashes
Operation
Status
RF Link
Healthy
Out of range
Powered
But unpaired
In Pairing Mode
Description
System
operating OK
No RF connection
to other
MAINSLINK-PRO
Waiting to be
paired to another
MAINSLINK-PRO
Actively sending an RF
‘Please Pair message’
Coms indicated RF
Link is healthy
Indicates Output is
LIVE
Indicates Input is LIVE
To Next Page
Loading...