RF REGIMEN MANUAL | 11
BEFORE YOU BEGIN
Remove all device components from the box (charging port,
adapter, device). Before using your RF DEVICE for the rst time,
charge the battery to full. This may take up to 6 hours. Please
note that you cannot use your RF DEVICE while it is charging.
(Refer to section “Charging Your Device”).
Inspect the device before each use to check for any damages.
Check the casing, as well as the power cord, for any cuts, frays,
or other forms of damage. If your device is damaged in any way,
whether this may be a crack in the outer shell, an improperly
placed fan vent, or a damaged plug, make sure that you do not
use the device. Please contact customer service.
To Next Page
Loading...