24 | RF REGIMEN MANUAL
• Insert the applicator into the cradle in the charging port.
• Plug the adapter plug into the charging port socket.
• Plug the adapter into a standard 110V AC electrical outlet.
• The battery-charging light will show a FLASHING YELLOW
light to indicate that your device is in the process of
charging.
• When battery-charging-indicator light turns to STEADY
YELLOW, your device is fully charged.
• The applicator will only maintain its charge for about 3
days. It is recommended that the applicator be charged
after every use.
CAUTION!
Never use any power supply other than the one provided with
your device. If you lose the power unit or it is damaged, contact
the manufacturer for a new one.
CHARGING YOUR DEVICE
To Next Page
Loading...