RFRemotech MS12Q User Manual

MS12Q
Wireless Firing System
For Pyrotechnics and Fireworks Show
RFRemote
ch Radio Frequency Remote Technology
Remote Control Products, Remote Controllable Service
Warnings:
The purpose of this device is to cause the ignition of fireworks. Fireworks are explosives and may cause
personal injuries or death to yourself or others, including spectators. You are responsible for the safe and
legal use of this device according to the laws and regulations of your country and/or state/province/district.
RFRemotech is not responsible for illegal or unsafe use of this device. The buyer/user assumes all
responsibility and liability in the use of this device and further agrees, by purchase and/or use of this device,
to indemnify and hold harmless RFRemotech against all liability for injury, loss, or damage direct or
consequential arising out of the use of, or inability to use this device.
You must perform the safety tests (Page 4) every time
you use the system.
Model:RF12A

RFRemotech MS12Q Specifications

General

Brand	RFRemotech
Model	MS12Q
Category	Remote Control
Language	English

Summary

Warnings

System Description

Transmitters

Details of Transmitter A for Dividual Firing and Transmitter B for Interval Firing modes.

Firing Module Features

Specifications include FCC/CE certification, OOK Wireless, 12 cues, power, and range.

Operating Modes

Dividual Firing Mode

Using Transmitter A to fire individual cues on the firing module sequentially.

Interval Firing Mode

Using Transmitter B to fire cues with a specified time interval between each.

Setup and Safety Checks

Installing Batteries

Instructions for installing internal 6xAA batteries or connecting external power.

Safety Tests

Step-by-step procedure to verify module and transmitter functionality before use.

System Functions

Learn Codes / Clear Codes

Procedure for synchronizing transmitters to the firing module and clearing learned codes.

Test Function

Verifying the continuity of connected e-matches or igniters for each cue.

Arm Function

Engaging the system to prepare for firing after successful tests.

Low Power Alarm

Alert system indicating low battery voltage for timely replacement.

Digital Readout Meter

Indicator for battery voltage when the system is in Learn or Arm mode.