RGF REME HALO Zero - Electrical Connections and Cell Replacement; Unit Mounting and Sealing; Electrical Connection (24 VAC); Replacing REME HALOZero Cell

3a. Electrical Connecon: (For installaon using 24VAC transformers)
RGF® recommends for opmal performance and maximum cell life that
the REME HALO®Zero product line operates connuously. For wiring
assistance, see .Figure 7
REME HALO®Zero may be connected to any suitable 120, 208 or 240 VAC
source with the supplied 40VA transformer. When installing mulple
units on an HVAC system, it is recommended that a properly sized
secondary 24 VAC transformer be ulized.
NOTE: BE SURE TO AFFIX CAUTION DECAL
NEXT TO MOUNTED UNIT.
APPOSEZ L'AUTOCOLLANT
D'AVERTISSEMENT À CTÉ DE L'APPAREIL.
REME HALO®Zero
REME HALO®Zero
Replacing REME HALO®Zero Cell