RH Teen Laguna Bunk Bed Twin Over Twin User Manual

Made in Vietnam
Distributed in the U.S.A. by:
Restoration Hardware Baby & Child
11640 Harrel St. Suite B
Mira Loma, CA 91752
www.rhbabyandchild.com
Distributed in Canada by:
Restoration Hardware Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to the address above. Include the
product model number, color, and a brief description of the part.
Call 1-800-762-1751.
CARE AND CLEANING
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. Dust often using a clean, soft, dry cloth. Blot spills immediately and wipe
with a clean damp cloth. If the crib is to be stored, store in a cool dry place and carefully package all original hardware to protect from loss.
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included)
Wrench (included)
Screwdriver (not included)
Note: It may be easier to assemble product with two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen
1
2
-
3
4
of a turn. After bunks is
completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
All Restoration Hardware Bunk Beds are designed to meet the highest safety
standards and comply with all U.S. and Canadian Bunk Beds regulations.
LAGUNA BUNK BED - TWIN OVER TWIN ISNTRUCTIONS
Page 1 of 10
WARNING: Read all instructions before assembling
this product. KEEP INSTRUCTIONS FOR FUTURE
USE.
INSTRUCTIONS

RH Teen Laguna Bunk Bed Twin Over Twin Specifications

General

Category	Indoor Furnishing
Type	Bunk Bed
Size	Twin Over Twin
Brand	RH Teen
Model	Laguna
Material	Wood
Weight Capacity (upper bunk)	200 lbs
Weight Capacity (lower bunk)	250 lbs
Assembly Required	Yes
Ladder Included	Yes
Guardrails Included	Yes
Mattress Included	No

Summary

Customer Service

Care and Cleaning

Tools and Installation

Important Safety Information

General Safety Guidelines

Key safety rules for bunk bed usage, mattress, guardrails, and prohibited activities.

Strangulation Hazard Warning

Warning against attaching items to the bunk bed that are not designed for it.

Component Identification and Hardware

Assembly Instructions

Prepare Headboard and Footboard

Attaching threaded rods to the headboard and footboard posts before frame assembly.

Attach Side Rails and Storage

Connecting side rails and storage unit to the headboard and footboard.

Install Slats and Platform Panels

Securing bed slats and platform panels to the bunk bed frame.

Attach Ladder and Finalize

Installing the ladder, including placement options, and completing the assembly.