RH Teen DEVYN DAYBED WITH STORAGE - User Manual

PARTS INCLUDED
A [2] Side Panel
B [1]
Front Panel
Headboard
D [1] Storage
E [4] Slats
F [2] Patform Panels
TOOLS NEEDED:
Phillips Screwdriver (not included)
ASSEMBLY INSTRUCTIONS
1. Stand the Headboard (C) upright and hook Side Panels (A) into Headboard (C) as
shown in the Diagram I.
3. Hook the Front Panel (B) into Side Panels (A) as shown in Diagram III.
4. Place the Slat (E) into the cleats on the inside of the Headboard (C) and Front Panel (B).
Screw the ends of the Slats (E) to the cleats using Screw (1), as shown in Diagram IV.
5. Lay the Patform Panels (F) flat on top of the Slats (E),as shown in Diagram V.
[1]
C
Page 1 of 2
CAR
E INSTRUCTIONS
Spot clean only with a soft, damp cloth ,
Bed must be assembled by at least two people.
Please read instructions carefully before assembling bed.
Use the above parts and hardware list to identify each component.
Keep all packing materials until assembly is complete to avoid loss of smaller parts.
A
C
D
E
F
B
2. Attached the Storage (D) to Side Panels (A) as shown in Diagram II.

Summary

Assembly Instructions

Connecting Headboard and Side Panels

Stand Headboard (C) upright and hook Side Panels (A) into Headboard (C) as shown in Diagram I.

Attaching Storage Unit

Attach the Storage (D) to Side Panels (A) as shown in Diagram II.

Hooking the Front Panel

Hook the Front Panel (B) into Side Panels (A) as shown in Diagram III.

Installing and Securing Slats

Place Slats (E) into cleats and screw ends to cleats using Screw (1) as shown in Diagram IV.

Placing Platform Panels

Lay the Platform Panels (F) flat on top of the Slats (E) as shown in Diagram V.

Care Instructions

RH Teen DEVYN DAYBED WITH STORAGE Specifications

General

Brand	RH Teen
Model	DEVYN DAYBED WITH STORAGE
Category	Indoor Furnishing
Language	English