ASSEMBLY INSTRUCTIONS
Page 2 of 2
PROVENCE CANOPY DOUBLE CHAISE
STEP 1 :
Insert the teak post (B) into the corner hole of
the chaise. Pull up the chaise back, then screw
in bolt (G) with Allen wrench (F). Repeat for each
post.
ST E P 2 :
Place teak canopy top (A) on the teak posts (B),
aligning the holes. Screw in bolts (D) with Allen
wrench (F). Use aluminum pole (H) to attach
canopy; see detail below.
C
B
G
B
B
B
C
A
D
E
B
A
Long side
H
H
H
H
18 rings on bottom of each rail
11 rings on each interior side rail
To Previous Page
Loading...
