Clock N/A Set clock time.
STD/AUTO
STD BWU ‘ON’ 24 hours 7 days.
AUTO
BWU operates according to programmed ‘Set
ON/OFF Times’.
Set ON/OFF
Times
N/A Program ON/OFF times for AUTO mode.
Sleep Delay Time N/A
Program delay-off time from last usage
(operates in AUTO mode only).
Filter Life*
Remaining Life Displays remaining filter life in litres.
Filter Reset
Resets filter ‘Remaining Life’ to ‘Set Filter Life’
setting. Utilised when replacing filter.
Set Filter Life Program filter life start value in litres.
Service Menu
Error Codes
Displays alpha error codes (refer to page
11
for
error codes and their meanings).
Boiling Temp
Displays the current boiling water temperature in
ºC.
Calib. Reset
Reactivates automatic boiling point calibration
operation.
Temp Override
Manually select calibrated temp setting.
Selectable from 70 – 99 ºC.
Software Version
Displays Timer and Controller software versions
(top = Timer, lower = Controller).
Temp Show
ON/OFF
Enable/disable boiling water temperature display
on timer screen (in ºC).
TB Treq
Displays boiling water temperatures in ºC. (TB =
calibrated temp, Treq = maintained temp).
*Boiling Water Units do not have a water filter however filter life functions can be
utilised if the water supply to the BWU has a water filter fitted.
To select a Timer Mode
Press the (Prog) button until the desired mode is displayed on the screen. Press the
(Accept) button to confirm selection. Pressing (Cancel) button at any time returns
the unit to the main menu. Any functions previously accepted will be retained.
Note: The display will revert back to main menu from any mode if a button has not
been pressed for 1 minute.
To Next Page
Loading...
Need help?
General
