HEAT PUMP AND TANK ASSEMBLY
16
9. Inlet Flexible Braided Hose: Attach the flexible braided hose marked
“INLET” to the water fitting marked “INLET”.
Tighten the swivel nut on the hose using a 24 mm spanner.
Push down the pipe seal ring to seat over the swivel nut and against
the pipe seal cover.
PIPE
SEAL
RING
PIPE
SEAL
COVER
PIPE
SEAL
RING
(SEATED
DOWN)
INLET
SK7138 - STEP10
INLET WATER FITTING
INLET
Step 9
attach inlet water hose and seat pipe seal ring
10. Outlet Flexible Braided Hose: Attach the flexible braided hose marked
“OUTLET” to the water fitting marked “OUTLET”.
Tighten the swivel nut on the hose using a 24 mm spanner.
Push down the pipe seal ring to seat over the swivel nut and against
the pipe seal cover.
PIPE
SEAL
RING
PIPE
SEAL
COVER
PIPE
SEAL
RING
(SEATED
DOWN
OUTLET
SK7138 - STEP 9
OUTLET WATER FITTNG
OUTLET
Step 10
attach outlet water hose and seat pipe seal ring
To Next Page
Loading...
