Rheem 310 - Page 17

HEAT PUMP AND TANK ASSEMBLY
17
11. Air Bleed Valve: Open the air bleed valve screw by rotating anticlockwise
one turn.
This will allow air to bleed from the circulator and flexible hose during the
filling of the tank process.
 Leave the air bleed valve screw in this position.
 Ensure the screw is not removed, nor left screwed shut.
INSULATION
ROTATE AIR BLEED VALVE
SCREW ONE TURN
ANTICLOCKWISE
Step 11
open air bleed valve screw by rotating one turn anticlockwise