Rheem Classic Plus Series User Manual

Air
Test
RP17**H Series
33
Error Code
If an error occurs, the LED will light up to display the error location
and the error code.
IN THE EVENT OF AN ERROR
The error LED blink quickly.
ERROR LOCATION DISPLAY
LEDs A to F of MONITOR light up and display the error location.
In the case of an overall error, LEDs A to F of MONITOR do not
light up.
EXAMPLE: Coil error in indoor unit B
ERROR CODE DISPLAY
While the error is occurring, briefly press SW1. The error code is
displayed.
EXAMPLE: Coil error (Error code = 9A.1)
FEDC
MONITOR
ERROR
BA
POWER
MODE
[A(10)] 1
Blink
(High-speed)
(9-blink)
F
1
2
3
4
5
6
7
8
9
A
C
F
J
P
U
EDC
For MONITOR
(A and B)
Display mode
LED on:
LED off:
Blink:
(0.5s Light on
/ 0.5s Light off)
Number
of blinking: ( )
A: 10-Blink
C: 11-Blink
F: 12-Blink
J: 13-Blink
P: 14-Blink
U: 15-Blink
FEDC
MONITOR
ERROR
BA
POWER
MODE
blink
(High-speed)
FEDC
MONITOR
ERROR
BA
POWER
MODE
blink
(High-speed)

Rheem Classic Plus Series Specifications

General

Brand	Rheem
Model	Classic Plus Series
Category	Water Pump
Language	English