8 Quick Set-Up Guide for Touchscreen Thermostats
PROGRAMMING YOUR THERMOSTAT
When programming your thermostat,
you may copy the program from one day
to another day or group of days using
the
key. In 7-day programming
mode, a day can be copied to another
day or all six other days. In 5/1/1 day
programming mode the weekday (Mon-
Fri) program can be copied into Sat and
Sun or either Sat or Sun.
To Copy a Program from day
to another
1. In Set Schedule mode, enter the program for
the day or select the day you wish to copy by
pressing Advance key.
2. Press . The display will show “Copy”
next to the SYSTEM key and the day of the
week that will be copied.
3. Press . The day being copied will be
indicated and the other days will be ashing.
4. If you wish to copy to all days skip to next step
or press
until the day you wish to
copy to is ashing.
5. Press . “Copy” will disappear, the day
you copied from will disappear and the day(s)
you copied to will be on.
6. If you wish to copy this same program into
other day, press
and repeat steps 3, 4,
and 5.
7. Press touch key to return to normal
operation.
To Next Page
Loading...
Need help?
General
