Rheem *HC-TST412MDMS Series User Manual

2 Quick Set-Up Guide for Touchscreen Thermostats
Quick Set-Up Guide for Touchscreen Thermostat 3
7. The default is Remote OFF for (remote
sensor disabled). If no change is required,
then press
once to move to the next
Menu Reference number; otherwise, use the
or touch keys to select Remote On
(enables the remote sensor).
8. Press once to move to Menu sub-
selection for setting remote sensor location.
The default is Remote In (Indoor remote
sensor). Use
or touch keys if Outdoor
Remote (Outdoor remote sensor) is desired.
9. Press once. If Remote In sub-selection
will change to choose local sensor. Default
is Ls On – Local sensor enabled. Use
or
touch keys to change to LS OFF – Local
sensor disabled.
SYSTEM/REMOTE SENSOR CONFIGURATION
5HPRWH
2XWGRRU5HPRWH
Menu remote sensor has sub-selections
that will appear if installer selects the
Remote (On) setting.
Selecting this setting
will enable Dual Fuel
(dF) feature using
outdoor remote sensor
(see page 5)
Dual Fuel (dF) feature using
software logic (see next page)
5HPRWH
5HPRWH
or
or
or
default
default
default
NOTES
A. Menu selection will skip Dual Fuel setup if Menu Reference number 1 was not changed to HP1 or HP2. If HP1 or HP2 was selected, then Menu selection
for Dual Fuel using software logic or Dual Fuel using outdoor remote sensor will appear on the display depending on the remote sensor selection.
B. Press
touch key to exit the Installer Conguration Menu.

Rheem *HC-TST412MDMS Series Specifications

General

Brand	Rheem
Model	*HC-TST412MDMS Series
Category	Thermostat
Language	English