Rheem PRO415TM - User Manual

PROFESSIONAL
TM
Available in 40 and 60 Gallon Electric Models

Upgradeable 6 Year Limited Tank Warranty to 8 Years*

2 Year Limited Parts Warranty*
•
Unique professional design
•
EverKleen
™
self cleaning dip tube
•
Oversized magnesium anode rod
•
R-Foam insulation (up to R-20)
•
Temperature and pressure relief valve
included
•
Factory installed plumbing nipples
•
Professional installation
•
Certified to the CAN/CSA C191.1-M90
efficiency standard
* See Residential Warranty Information Brochure for
complete warranty information.
Get
2 MORE YEARS
with ProtectionPlus
™
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS
STORAGE CAPACITY OVERALL HEIGHT TO ESTIMATED
STANDARD ELEMENTS HEIGHT DIAMETER DRAIN VALVE SHIPPING
U.S. IMP. ELEMENTS 208 VOLT 240 VOLT A B C WEIGHT
MODEL NUMBER GALS. GALS. LITERS QTY. WATT. AMP. WATT. AMP. IN. MM IN. MM IN. MM LBS. KG
PRO415TM 45 37.5 170 2 2250 10.8 3000 12.5 46 1168 21-3/4 552 3-1/2 89 117 53
PRO425TM 45 37.5 170 2 2250 10.8 3000 12.5 46 1168 24-1/4 616 3-1/2 89 134 61
PRO615TM 72 60 270 2 3380 16.3 4500 18.8 59 1499 23 584 3-1/2 89 177 80
PRO620TM 72 60 270 2 3380 16.3 4500 18.8 59 1499 24-1/2 622 3-1/2 89 188 85
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
The Exclusive Professional Installation Warranty
When this Rheem PROFESSIONAL water heater is installed by a
licensed contractor, the consumer can upgrade the limited tank
warranty from 6 to 8 years and the limited parts warranty from
1 to 2 years by returning to Rheem the warranty registration card
and a copy of the contractor’s invoice.
This Rheem exclusive warranty upgrade feature enhances your
value as a plumbing professional. A professional installation is a
better installation!
Refer to the warranty certificate enclosed with each heater for
specific details.
8
YEAR LIMITED
TANK WARRANTY
BECOMES
10
Notes: 3/4" N.P.T. Outlet, Inlet, Anode Rod, T&P Valve Connections. • 140°F Thermostat Setting. • Not available in 3 phase wiring.
Designed Exclusively For The Plumbing
Professional, With a Warranty to Match!
Before purchasing this appliance, read important energy cost and
efficiency information available from your supplier.
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3
03/06 WP FORM NO. 101-45CAN Rev. 7

Summary

Rheem Professional Water Heater Overview

Model Availability and Key Features

Details on available 40 and 60 gallon electric models, including unique design and energy efficiency standards.

Professional Installation Warranty Upgrade

Information on upgrading limited tank and parts warranties through professional installation by a licensed contractor.

Construction Features

R-Foam Insulation System

Rigid polyurethane foam insulation for improved economy and fuel savings, minimizing heat loss.

Rheemglas Tank Design

Tank coated with porcelain formula fused to steel for a smooth, tough, glass-like lining resisting corrosion.

Key Components and Safety

Details on heating elements, anode rod, dip tube, over temperature protector, and automatic temperature control.

Rheem PRO415TM Specifications

General

Capacity	40 gallons
Fuel Type	Electric
Voltage	240 V
Wattage	4500 W
Recovery Rate	21 gallons per hour
Warranty	6 years
Type	Tank