Pattern B
1. Modify the remote controller cable as follows:
• Use a tool to cut off the terminal on the end of the remote controller cable and then
remove the insulation from the cut end of the cable as shown in following figure.
• Connect the remote controller cable and connecting cable as shown in following figure.
• Be sure to insulate the connection between the cables.
13/16 in.
(20 mm)
Remote controller cable
Connecting
cable
White
Red
White
Red
Black
Insulated
connection
Black
2. Connect the remote controller cable.
• Connect the cable made in step 1. to the indoor unit PCB.
Remote controller cable
Connecting cable
Indoor unit PCB
¢ Optional parts
Wall mounted Model name
RIWH07—15AVFJ RXXCBXZ2
The communication kit is needed for connecting the wired remote controller to the wall mount-
ed type.
- 41 -
MULTI TYPE
5 rooms type
To Next Page
Loading...
