EasyManua.ls Logo

Rheem RTG-70DVLP-3 - Page 55

Rheem RTG-70DVLP-3
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
Maximum water temperature occurs while the
water heater burner is on. To determine the water
temperature:
Turn on the hot water faucet and place a
thermometer in the water stream.
NOTICE:
Water temperature at the faucet may vary
depending on the season and the length of pipe
from the water heater.
The control temperature range is between 100°F (38°C)
and 120°F (49°C)� To adjust the temperature to a desired
setting, press the UP or DOWN adjustment button on the
face of the control� The new temperature set point will
show on the LED display
NOTICE:
The temperature set point on the standard remote
control cannot be increased above 112°F (44°C)
when a hot water faucet is in the open position.
To achieve temperatures above 120°F (49°C),
contact a qualified service technician. Only
factory-authorized remote control(s) should be
used.
The water heater may not operate with a small water flow
(<0�4 gpm)� Increase the water flow and recheck� If it still
does not operate with the hot water faucet completely open,
increase the temperature setting on the remote control�
Water Heater Facts
!
DANGER:
Water temperatures above 125°F (52°C) will result
in death and/or severe burns from scalding.
The hottest-temperature water will be at the faucet closest
to the water heater
Always remember to test the water temperature with your
hand before use�
Always supervise young children or others who are
incapacitated�
The water heater is equipped with a device that will shut
off the gas supply to the burner if the water heater exceeds
normal operating temperatures�
Any water heater that has been subjected to fire, flood,
physical damage, or been under water should be turned off
at the manual gas shut-off valve and not used until it has
been checked by qualified service personnel�
Setting the Water Temperature (cont.)
Use Instructions
!
PRIORITY
In-Use Indicator
(Lit during operation)
In-Use Indicator
(Lit during operation)
Priority
Indicator
Priority
Indicator
Power On/Off
Indicator
Temperature
Adjustment
Buttons
Temperature
Adjustment
Buttons
WiFi
Button
Priority
Indicator
Power On/Off
Indicator
In-Use Indicator
Lit during operation
Alarm/ Error
Indicator
WiFi Signal
Indicator
Power On/
Off Button
LED Temperature
and Error Code
Display
LED Temperature
and Error Code
Display
Power On/Off
Button
(WiFi model only)(Outdoor model only)
LED DISPLAY LED WiFi DISPLAY
Power On/Off
Button
Temperature
Adjustment
Buttons
USING YOUR WATER HEATER

Related product manuals