Rheem RTGH-RH11DV - Dimensions

AP18733 REV. 3.2.17
21
▪ C. DIMENSIONS
Table 7 – Adapter Specications
Figure 3 – Water Heater Drainage Locations
DESCRIPTION DIAMETER
A Exhaust Outlet Pipe 3" (7.6 cm)
B Air Intake 3" (7.6 cm)
C DHW Outlet Adapter ¾" (1.9 cm)
D Condensate Adapter ½" (1.2 cm)
E Recirculation Return ¾" (1.9 cm)
F DHW Inlet Adapter ¾" (1.9 cm)
G Gas Inlet ¾" (1.9 cm)
6.1" [156mm] 5.4" [136mm]
2.4" [60mm]
6.8" [173mm]
2.6" [67mm]
3.2" [81mm]
10.2" [260mm]
13.6" [346mm]
4.0" [101mm]
11.5" [292mm]
4.6" [117mm]
28.7" [728mm]
Figure 2 – Specications and Dimensions