Rheem RTGH-RH11DV - Page 35

AP18733 REV. 3.2.17
35
Figure 12 – LP-325-X
Figure 13 – NOTE: These drawings are meant to demonstrate system venting only. The installer is responsible for
all equipment and detailing required by local codes.
INDOOR COMBUSTION AIR (SINGLE PIPE) _HORIZIONTAL
INSERT SCREEN IN EACH
OPEN END OF TEE
INDOOR COMBUSTION AIR (SINGLE PIPE)_Vertical
ROOF FLASHING
3"Min
(7.5cm)
MAINTAIN 12"(30cm) MINIMUM
CLEARANCE ABOVE
HIGHEST ANTICIPATED SNOW
LEVEL OR GRADE,
WHICHEVER IS GREATER.
1΄(30cm)
INSERT SCREEN IN
EACH OPEN END OF TEE