OPERATION
GR60/72 02/07 Operation Section 4-18
© 2007 Alamo Group Inc.
OPERATION
• Ensure the tailwheel beam position support
bolts are properly intalled and tightened.
• Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0045_A
• Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, lowered,
and in good condition.
• Ensure the driveline integral shield is in good
condition and rotates freely.
• Ensure the driveline slip clutch (if equipped) is
properly adjusted. OPS-R-0039
• Inspect the gearbox oil level. A low oil level is a
warning sign that the gearbox may be cracked
or its seal is damaged and needs replacement.
• Ensure the gearbox vent is in place and free
from clogs. OPS-R-0040
To Next Page
