Need help?Do you have a question about the Rhosonics SDM Series and is the answer not in the manual?
General| Category | Density Meter |
|---|---|
| Process Pressure | Up to 100 bar |
| Material | Stainless Steel 316L |
| Measurement Range (%) | 0 - 100% |
| Accuracy (%) | ±0.1% |
| Communication | 4-20mA, Modbus |
| Power Supply | 24 VDC |
| Protection Class | IP67 |
| Process Connection | Flange |
Provides guidelines for choosing the optimal installation location for the SDM.
Covers power supply, HART, and USB connections for the SDM.
Explains setting up HART communication using DD edit software.
Explains loading and reading configuration settings via USB.
Provides instructions for dismounting and mounting the sensor safely.
Covers system status, restore calibration, set clock, and logging menu.
Describes how to retrieve log data from the analyzer using a USB stick.
Details distributor calibrations via PC service application.
To Next Page
