EN
46
CONDITIONS FOR USE
Allowed use
For safety purposes, the device must be installed
and used according to the instructions provided
and in particular, in standard conditions, dange-
rous live parts must not be accessible. The device
must be properly protected against water and dust
according to the application and must only be
accessible by using a tool (except for the front). The
device is suitable for independent assembly and
has been checked concerning aspects regarding
safety based on harmonised European standards
of reference.
It is classified:
• according to the construction as an automatic
electronic control device for temperature control
to be incorporated for independent assembly;
• according to automatic operating features as a
type 1B action control device;
• according to the structure and SW class as class
A device.
• according to the connection as a device with
flexible external separable cable, with type Y
connection.
• device with pollution degree 2
• material group l a
• according to overvoltage category as
class II device
• testing temperature with ball: 90 °C
• according to fire resistance in category D
Prohibited use
Any use other than that which is allowed is prohi-
bited.
The supplied relay contacts are functional and
subject to breakage: any protective devices forese-
en by product standards or suggested by common
sense due to clear safety requirements must be
implemented outside of the device.
To Next Page
Loading...
Need help?
General
