RHOSS THAITY 116 User Manual

Serie ELECTA
THAITY 105-110-116
Pompe di calore reversibili monoblocco con evaporazione/condensazione ad aria e ventilatori elicoidali e gas refrigerante ecologico
R410A. Serie a compressori ermeticiti rotativi DC brushless inverter.
Monobloc reversible heat pumps with evaporation/condensation axial fans and ecological refrigerant R410A. Series with brushless
inverter DC rotary hermetic compressors.
Pompes à chaleur réversibles monobloc avec ventilateurs axiaux évaporation/condensation et réfrigérant écologique R410A. Série à
compresseurs hermétiques rotatifs CC brushless inverter.
Kompakte reversible Wärmepumpen mit Verdampfung / Kondensation Axialventilatoren und ökologische Kältemittel R410A. Baureihe
mit hermetischen Turboverdichtern DC Brushless Inverter.
Bombas de calor monobloque reversibles con evaporación /condensación de aire con ventiladores axiales y refrigerante ecológico
R410A. Serie con compresores herméticos rotativos DC brushless inverter.
H58000/C
Italiano English Français Deutsch Español
ISTRUZIONI PER L’USO
INSTRUCTIONS FOR USE
MODE D’EMPLOI
GEBRAUCHSANWEISUNG
INSTRUCCIONES DE USO

RHOSS THAITY 116 Specifications

General

Brand	RHOSS
Model	THAITY 116
Category	Heat Pump
Language	English

Summary

Instructions for Use

Responsibility and Recommendations

Safety Procedures

Guidelines for safe installation and operation of the unit.

Premise

Technical Data ELECTA

User Interface

Thermoregulator User Interface

Details on the function keys and operation of the thermoregulator.

List of Parameters User Interface

Comprehensive list of parameters accessible via the User Interface, categorized into Set and Prg menus.

Logic of Operation

Heat Pump Operation Control

Control of heat pump on/off state, operation modes, and frequency limitation.

Circulator and System Control

Activation logic for circulators and set point control for system operation.

Climatic Curves and Compensation

How climatic curves and dynamic compensation affect water temperature regulation.

Ancillary Functions Management

Management of sensors, DHW, dehumidifier, and protection functions.

Warnings

Meaning of Symbols and Indications

Explanation of safety symbols and warning indicators used in the manual.

Installation

Safety Installation Notice

Essential safety precautions and requirements before and during installation.

Dimensions, Weights, and Clearances

Physical dimensions, weights, and required clearances for unit installation.

Main Components

Identification of the main physical components of the heat pump units.

Hydraulic and Electrical Connections

Detailed instructions for hydraulic and electrical connections, including terminal block specifications.

Installation Check and Test Operation

Procedures for verifying installation correctness and performing initial system tests.

Assistance and Maintenance

Troubleshooting and Alarm Codes

Guidance on resolving issues and interpreting error codes from the user interface and PCB.

Wiring Diagrams