RIB T2-CRX User Manual

AERIAL
24Vdc
per
ALIMENTAZIONE ACCESSORI
FOTOCELLULE
K BUTTON
COM
ALIMENTAZIONE
230V 50-60Hz
A* A S C NC A* AS
ANTENNA - Utilizzare un cavo coassiale RG58
PONTICELLARE
COM-EDGE
A* A Rispettate la polarità
dell’alimentazione delle fotocellule
MOTOR 2
MOTORE CHE CHIUDE PER PRIMO
COLLEGARE CONDENSATORE TRA V2 e W2
MOTOR 1
MOTORE CHE APRE PER PRIMO
COLLEGARE CONDENSATORE TRA V1 e W1
ISTRUZIONI SEMPLIFICATE PER DUKE CON T2-CRX

RIB T2-CRX Specifications

General

Brand	RIB
Model	T2-CRX
Category	Controller
Language	English

Summary

1ST PHASE: Adjustments and Checks

Initial Setup, Motor Tuning, and Stop Adjustment

Configure switches, supply power, tune motors, and adjust mechanical stops.

2nd PHASE: Programming Total Opening Time

Programming Total Opening Times

Program total opening times for both leaves by recording movements and setting delays.

3rd PHASE: Remote Control Programming

Remote Control Pairing and Exit Procedures

Pair remote controls, manage programming time, and exit the programming mode.

4th PHASE: Programming Pedestrian Opening Times

Pedestrian Opening Time Programming

Program pedestrian opening times by setting DIPs and making terminal contacts.

5th PHASE: Customising Configuration

Microswitch and Jumper Configuration

Configure device functions and settings using microswitches and jumpers.