RIB B2 User Manual (English)

Need help?

Do you have a question about the RIB B2 and is the answer not in the manual?

RIB B2 Specifications

General

Brand	RIB
Model	B2
Category	Controller
Language	English

Summary

Point B - Settings

DIP Switches Control

Configuration options for the control board's functionality and behavior.

Torque Trimmer - Electronic regulator for motor torque

Adjusts motor torque output via a trimmer for optimal performance.

Low Speed Trimmer - Electronic regulator for low speed on approach

Regulates low speed for gate approach to ensure smooth operation.

TCA Trimmer - Automatic Closing pause time regulator for Total or Pedestrian Openings

Sets pause time for automatic closing after total or pedestrian openings.

D - Times Programming

For 2 Motors - DIP 12 OFF

Programming procedure for two motors with DIP 12 set to OFF.

For 2 Motors with Electric Limit Switches - DIP 12 OFF and DIP 14 ON

Programming for two motors using electric limit switches.

For 2 Motors with Encoder - DIP 12 OFF, DIP 14 OFF and DIP 17 ON

Programming for two motors using an encoder.

For 1 Motor - DIP12 ON

Programming procedure for a single motor with DIP 12 set to ON.

For 1 Motor with Electric Limit Switches - DIP 12 ON and DIP 14 ON

Programming for a single motor with electric limit switches.

For 1 Motor with Encoder - DIP 12 ON, DIP 14 OFF and DIP 17 ON

Programming for a single motor using an encoder.

Pedestrian Opening

Procedure for setting up partial opening for pedestrian access.

Operation of Safety Accessories

Functioning in Hold-to-Run Mode When Safety Devices are Failing

Operation mode when safety devices fail, requiring manual control.

Trouble Shooting

Photocells Connections

2 photocells FIT SLIM, FIT SYNCRO with self-test

4 NOVA photocells synchronized with self-test

4 FIT SLIM / FIT SYNCRO photocells with self-test and infrared signal synchronizer

2 photocells F97P, F971 with self-test

2 photocells FIT METAL with self-test

Related product manuals