RIB B2-CRX - User Manual

1
B2
ITALIANO pag. 05 / FRANÇAIS pag. 14 / ENGLISH page 23 / DEUTSCH pag. 32 / ESPAÑOL pag. 41
code ABB2050 B2-CRX 230V 50-60Hz
code ABB2051 B2-CRX 120V 60Hz
code AC08074 B2 230V 50-60Hz solo scheda, seule carte, only pc board, nür Karte, solo tarjeta de control
Vedere pagina 13
Voir page 22
See page 31
Siehe Seite 40
Ver página 49

Summary

Installation Safety Guidelines

Control Panel and Electrical Connections

Terminal Block Overview

Power Supply and Motor Wiring

Wiring details for main power supply and connections for Motors 1 and 2.

Control Panel Settings and Programming

DIP Switch Configuration

Guide to setting DIP switches for various operational modes and functions.

Trimmer Adjustments

Instructions for adjusting TORQUE and LOW SPEED trimmers for optimal motor performance.

Time Programming and Special Operations

Procedures for programming operating times, pedestrian opening, and radio code functions.

Safety Accessory Operation and Alarms

Photocell and Edge Functionality

How photocells and safety edges operate, including auto-test and alarm features.

Technical Specifications and Troubleshooting

Trouble Shooting Guide

Step-by-step guide to diagnose and resolve common faults and issues.

RIB B2-CRX Specifications

General

Contact Configuration	SPDT
Output Voltage	24 Vac/Vdc
Max Current	10A
Operating Temperature	-30 to 140° F
Weight	0.2 lbs