Ribao BC-30 User Manual

30 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

BC-30

Currency Counter

User Manual

Contents

Contents.........................................................................................................................................0

1.Introduction................................................................................................................................ 1

1.1 Preface.............................................................................................................................. 1

1.2 Notice................................................................................................................................ 2

2. Installation Notice...................................................................................................................2

2.1 Installation Notice........................................................................................................ 2

Table of Contents

Questions and Answers:

J
Jennifer ChanAug 4, 2025
What to do if Ribao BC-30 Banknote Counter shows self-test error 194?
- M
  Matthew ThomasAug 4, 2025
  If your Ribao Banknote Counter displays a self-test error 194, it indicates that the stacker sensor is blocked. You should: - Check if the sensor is covered by dust or any other obstructions. - Verify that the sensor cable is securely connected.
A
Angel JohnsonAug 9, 2025
How to fix self-test error 193 on Ribao BC-30 Banknote Counter?
- C
  Cory RoseAug 9, 2025
  If you're encountering a self-test error 193 on your Ribao Banknote Counter, the hopper sensor might be blocked. Check the hopper sensor to ensure it's free from dust or any obstructions.
H
hernandezandrewAug 14, 2025
Why does my Ribao BC-30 show self-test error 195?
- N
  Nicholas BradyAug 14, 2025
  A self-test error 195 on your Ribao Banknote Counter indicates that the left IR sensor is blocked. Inspect the sensor for any dust or obstructions. Also, check to make sure the sensor cable is properly connected.
M
Mary LewisAug 18, 2025
What causes self-test error 199 on Ribao BC-30?
- J
  John LopezAug 19, 2025
  Self-test error 199 on your Ribao Banknote Counter is caused by an abnormal encode disk signal, specifically an encode value less than 10 after turning on the machine. To resolve this: - Check if the encode disk cable is loose. - Verify that the motor runs normally when the machine is turned on. - Check if the encode sensor is abnormal.

Ribao BC-30 Specifications

General

Brand	Ribao
Model	BC-30
Category	Banknote Counter
Language	English

Related product manuals

Preview: Ribao BC-55

Preview: Ribao BCS-160