Need help?Do you have a question about the Ribao BCS-160 and is the answer not in the manual?
Details general installation procedures and requirements, including contacting authorized distributors for assistance.
Specifies the recommended placement and necessary clearance space around the machine for operation and maintenance.
Guides the user through the initial startup procedure, including power-on and self-testing sequences.
Details the procedure for selecting and confirming the correct currency code for accurate counting.
Details how to configure sensitivity levels for various counterfeit detection sensors like UV, MG, MT, IR, OCR, HOLE, DOG-EAR, and OVD.
Explains how to adjust the sensitivity level for detecting double banknotes.
Covers various operational settings including reject capacity, date/time, buzzer, start way, default settings, and calibration.
Lists common error messages, their potential causes, and suggested solutions for troubleshooting.
Provides guidance on how to resolve banknote jamming issues, clear warning messages, and recount notes.
Details the process for upgrading the firmware on the machine's main board using a USB flash drive.
Provides instructions on cleaning the hopper sensor (QT) using a brush or clean cloth.
Guides on opening the machine's back cover and cleaning internal sensors like PS2, MG, MT, CIS, and UV1.
General| Hopper Capacity | 500 notes |
|---|---|
| Stacker Capacity | 200 notes |
| Display | LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Noise Level | < 60 dB |
| Counting Speed | 1000 pcs/min |
| Counterfeit Detection | UV, MG, IR |
To Next Page
