To Next Page
P
Pamela PriceSep 9, 2025
What does counting error code 251 mean on my Ribao BC-35?
- BbrandyhallSep 9, 2025
If your Ribao Cash Counter displays counting error code 251, this indicates a left UV warning.
What does counting error code 251 mean on my Ribao BC-35?
If your Ribao Cash Counter displays counting error code 251, this indicates a left UV warning.
What does counting error code 151 mean on a Ribao BC-35?
Counting error code 151 on the Ribao Cash Counter indicates that double notes were detected.
What does it mean if my Ribao BC-35 shows counting error code 452 or 453?
If your Ribao Cash Counter displays counting error codes 452 or 453, this indicates chained notes were detected.
What does counting error code 451 mean on my Ribao Cash Counter?
If your Ribao Cash Counter displays counting error code 451, this indicates that half notes were detected.
What does counting error code 551 mean on my Ribao BC-35 Cash Counter?
If your Ribao Cash Counter displays counting error code 551, this indicates a size error was detected.
What does counting error code 454 mean on my Ribao Cash Counter?
If your Ribao Cash Counter displays counting error code 454, this indicates inclined notes were detected.
What to do if Ribao BC-35 displays self-test error code 191?
If your Ribao Cash Counter displays self-test error with code 191, it means the left side MG quantity is greater than 1. Check if notes stay in the passage.
What to do if Ribao Cash Counter displays self-test error code 192?
If your Ribao Cash Counter displays self-test error with code 192, it means the right side MG quantity is greater than 1. Check if notes stay in the passage.
What does counting error code 252 mean on my Ribao Cash Counter?
If your Ribao Cash Counter displays counting error code 252, this indicates a right UV warning.
What to do if Ribao Cash Counter displays self-test error code 193?
If your Ribao Cash Counter displays self-test error with code 193, it means the hopper sensor is blocked. Check if the hopper sensor is covered by dust or blocked.
General guidelines for installing the currency counter, including distributor contact.
Recommendations for machine placement, considering operational space and maintenance.
Detailed explanation of each button's function on the control panel for operation.
Explanation of the symbols and indicators displayed on the machine's interface.
Basic steps for powering on the machine and entering the initial loading interface.
Instructions on how to activate and configure the batch counting function.
Guide to activating and adjusting UV and MG counterfeit detection modes.
How to adjust the counting speed levels of the machine (High, Medium, Low).
How to enable and use the accumulative counting (ADD) function for total counts.
General| Batching | Yes |
|---|---|
| Add Function | Yes |
| Power Supply | AC 110V-220V, 50/60Hz |
| Counting Speed | 1000 pcs/min |
| Detection Methods | UV, MG |
