CS-610S+PRO Operation Manual V1.3
Page 15 of 16
·When it displays ERROR 01, it means the IR transistor is blocked,
please check the IR transistor and also the connecting cable. After the
problem is solved, please press CLR key to enter into main interface.
If the problem can not be solved, please contact your local distributor
for solution
（3）ERROR 04
·When it displays such error message, it means there is something
wrong with the rail sensor. Please check if any rail place gets
short-circuit, including all connecting wires check. After solving this
problem, press CLR key to come back into main display modes
interface.
10. Precautions
·Power cord using the machine configuration.
·Unplug the power cord before moving the machine.
·Avoid operation under direct sunlight.
·Do not put your hands, tools and clothes into the hopper to avoid
personal injury or malfunction of the machine.
·Don’t open the Visible Cover during operation.
To Next Page
Loading...
