CS-610S+PRO Operation Manual V1.3
Page 14 of 16
press ESC key to return to main menu interface
(4) TOTAL
This interface shows a memory record of all counted coin quantity.
You can enter the 1017 view or press the ESC key to exit back to the
main menu interface.
(5) TEST
This submenu is for production adjustments purpose only. It is not
available for users.
(6) LEARN
This submenu is for coin self-learning parameter tests and
adjustments. It is not available for users.
9. Trouble Shooting
During self-testing or machine working status, sometimes the LCD
screen may display following error code:
（1）ERROR ADJUST
·When it displays ERROR ADJUST, it means the signal of alloy sensor is
abnormal, the self-test can not be done normally, please contact your
local distributor for solution.
（2）ERROR 01
To Next Page
Loading...