Need help?Do you have a question about the Riccar 750 and is the answer not in the manual?
General| Brand | Riccar |
|---|---|
| Model | 750 |
| Category | Sewing Machine |
| Language | English |
Safety measures to prevent electric shock from the appliance.
Safety measures to prevent fire, burns, or injuries.
Advise to keep manual for future reference.
Introduction to the new sewing machine and its features.
Guidance on maintaining and using the machine.
Identifies major components of the sewing machine.
Identifies spool pins and bobbin winder parts.
Enumerates the included accessories for the sewing machine.
Instructions on configuring the machine for straight stitch.
Describes the table's use as an accessory storage box.
Guidance on using the foot pedal to regulate speed.
How to turn on the machine's work light.
Adjusting the sewing speed limit.
Using switches for needle positioning.
Utilizing the extra slow speed function.
Technique for sewing one stitch at a time.
Installing the seam guide for precise stitching.
Reminder to turn off power during operations.
Opening and closing the bobbin winder cover.
Step-by-step guide for threading the bobbin.
Properly placing the bobbin on the winder.
How to insert the bobbin case and thread.
Crucial safety step before inserting bobbin.
Importance of needle condition and troubleshooting.
Essential safety step before replacing needle.
Crucial safety step before threading.
Method to check bobbin thread tension.
How to set upper thread tension.
Visual examples of tension settings.
Guide to setting pressure for different fabrics.
How to lower the feed dog for specific stitches.
Using zigzag, pattern, and length dials.
Guide for matching needles to fabrics.
Explanations of different needle types.
Dial and pointer settings for straight stitch.
Moving the needle left or right.
Adjusting the width of zigzag stitches.
Setting stitch length for zigzag density.
Techniques for changing width while stitching.
Machine settings and fabric preparation.
How to adjust the guide for blind hems.
Step-by-step sewing process.
Advice on practicing blind hem sewing.
Explains forward and backward stitches for strength.
Application of twin needles for stretchy seams.
Steps for sewing buttons using specific settings.
Alternative method for sewing buttons.
Attaching the buttonhole foot and marking.
Step-by-step sewing process.
Advice on thread tension and backing.
Adjusting the stitch balance for buttonholes.
Positioning the zipper foot for sewing.
How to navigate the zipper pull.
Using cord for decorative welts.
Instructions for creating hems on delicate fabrics.
Using the zigzag stitch for edge finishing.
Specific instructions for the overcasting foot.
Threading for parallel tucks.
Techniques for creating tucks.
Using fabric cut on the bias.
Adjusting tension for best results.
Initial steps for smocking.
Creating and holding the gathers.
Applications for decorative cording.
How to feed and stitch cords.
Preparing designs and attaching them to fabric.
Stitch selection for applique work.
Instructions for creating dot stitches.
Instructions for creating sand stitches.
Procedures for cleaning internal components.
Steps to remove trapped threads.
Detailed instructions for cleaning and oiling.
Oiling points around the needle bar.
Oiling points on the machine's arm.
Oiling points on the lower part of the machine.
Causes and solutions for upper thread breakage.
Causes and solutions for lower thread breakage.
Causes and solutions for skipped stitches.
Causes and solutions for needle breakage.
Causes and solutions for loose stitches.
Causes and solutions for fabric gathering.
Causes and solutions for uneven stitching.
Causes and solutions for machine noise.
Causes and solutions for machine jams.
To Next Page
