Need help?Do you have a question about the Riccar 739DE Serger and is the answer not in the manual?
General| Brand | Riccar |
|---|---|
| Model | 739DE Serger |
| Category | Sewing Machine |
| Language | English |
Precautions to prevent electric shock hazards.
Warnings to prevent burns, fire, electric shock, and injuries.
Instruction to keep safety guidelines for future reference.
Lists components found inside the front cover.
Explains how to access thread guides and the free arm feature.
Instructions for connecting the sewing machine to power.
Details about the polarized plug for safety.
Lists and shows the included accessories with the sewing machine.
Step-by-step guide on how to insert a needle into the machine.
A chart matching fabric types with appropriate needle and thread.
General instructions for threading the serger machine.
Detailed steps for threading the upper looper with illustrations.
Detailed steps for threading the lower looper with illustrations.
Step-by-step guide for threading the right and left needles.
Method for changing threads without rethreading the entire machine.
Preparations and initial steps before commencing sewing.
Instructions on how to begin the sewing process.
How to properly finish a seam and chain off.
Steps to take when a thread breaks during sewing.
Details on performing a 2-needle, 4-thread overlock stitch.
Guide to setting thread tensions for a 4-thread overlock stitch.
Instructions for performing a 1-needle, 3-thread overlock stitch.
Guide to setting thread tensions for a 3-thread overlock stitch.
How to perform two-thread serging, including flatlock seams.
Steps to convert the machine from 3-thread to 2-thread sewing.
Tension settings for two-thread serging.
How to adjust the stitch length for different fabrics.
How to adjust differential feed for fabric handling and seam appearance.
Adjusting the width of the overedge seam.
How to adjust presser foot pressure for different fabrics.
How to perform narrow and rolled hemming.
Tension settings for narrow overedge hemming (Method A).
Introduction to Method B for rolled overedge hemming.
Tension settings for rolled overedge hemming (Method B).
Techniques for turning corners while serging.
Step-by-step guide for handling outside corners.
How to manage inside angles and slits during sewing.
Method for sewing outside curves without stopping.
How to use the free arm feature for sewing smaller items.
Creating decorative overlock stitches using different threads.
How to use the thread guide attachment for heavy threads.
General procedures for cleaning the serger machine.
Instructions on where and how often to oil the machine.
Steps to replace the sewing machine light bulb.
How to remove and replace the presser foot.
Instructions for replacing a dull lower knife.
Troubleshooting guide for common problems and their solutions.
A chart summarizing different stitches, needles, seam widths, and stitch lengths.
To Next Page
