To Next Page
L
lisapayneAug 5, 2025
What to do if I see a general network error on my Rice Lake Control Unit?
- JjonesstevenAug 5, 2025
If your Rice Lake Control Unit displays a general network error, consult error code 000140 for further details.
What to do if I see a general network error on my Rice Lake Control Unit?
If your Rice Lake Control Unit displays a general network error, consult error code 000140 for further details.
What to do if my Rice Lake Control Unit says 'Network cable disconnected'?
If the Rice Lake Control Unit displays 'Network cable disconnected', refer to error code 000145 for detailed troubleshooting steps.
What to do if my Rice Lake Control Unit displays 'Connection closed'?
If the Rice Lake Control Unit shows 'Connection closed', refer to error code 000141 for more information.
How to resolve protocol inconsistency on Rice Lake Control Unit?
Check that the selected protocol type matches the one managed by the hub module of your Rice Lake Control Unit.
General| Brand | Rice Lake |
|---|---|
| Model | SCT-2200 |
| Category | Transmitter |
| Language | English |
Defines safety signal indicators and provides general safety precautions for operating the equipment.
Details power supply, current draw, communication protocols, addressing, and baud rates.
Outlines FCC compliance rules and radio certificate numbers for Bluetooth and WiFi.
Guides on selecting fieldbus protocols, handling firmware versions (7.15, 8.04), and configuring hub mode.
Describes the structure and content of input and output data registers, including status and command registers.
Details the output data area for commands, command registers, parameter formats, relay settings, and Alibi pages.
Explains the flash storage area, its pages, and restrictions on writing metric parameters.
Outlines the procedure for performing metrological calibration on the scale module.
Describes using a PC web browser for scale monitoring, calibration, and setpoint configuration.
Explains module connection to transmitters and configuration for different firmware versions and protocols in hub mode.
Details the output data area structure and commands for controlling the fieldbus module.
Explains how the input data area can be populated with different pages for scale data and status.
Explains how network page data is used to populate byte structures for scale status and network information.
Covers Profibus, Ethernet IP, PROFINET, EtherCAT, CANopen, DeviceNet, and Modbus TCP/IP interface files.
