Richen EF42C - Locating Your Electric Fireplace

4
B. Fireplace insert for front attachment：
units:mm/Inch
Model
Width
（W）
Height
（H）
Depth
（D）
Mantel opening size
Mantel Minimum Depth
（RD）
Width
（OW）
Height
（OH）
EF42C 630/24.8 545/21.5 220/8.7
580-610
/22.8-24
510-540
/20-21.3
205/8
EF43C 710/28.0 625/24.6 220/8.7
660-690
/26-27
590-620
/23-24
205/8
EF44C 810/31.9 625/24.6 220/8.7
760-790
/30-31
590-620
/23-24
205/8
EF45C 890/35.0 685/27.0 220/8.7
840-870
/33-34
650-680
/26-27
205/8
LOCATING YOUR ELECTRIC FIREPLACE
Your new electric fireplace may be installed virtually anywhere in your home. However, when
choosing a location ensure that the general instructions are followed. For best results, install out of
direct sunlight. Power supply service must be either completed or placed within the electric
fireplace prior to finishing avoiding reconstruction.
WARNING! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the
electric fireplace.
Installation:
NOTE！
• After installation, ensure that there is a space between the wall and the
fireplace insert.
A. Rear attachment:
CAUTION！
• Install this appliance from the back of the mantel in order not to scratch mantel
bottom panel.
• Only use screws supplied with this appliance in order not to damage mantel.
Step 1. Install side fixing brackets, see pictures:
Spare parts: 2pcs side fixing brackets and 4pcs
M6×16 screws
Install the insert from the back of the mantel;