Mode No. Function Settings
Class 1 Class 2
4901 *
2 *
GA 1 Setting
(GAIN 0)
The coefficient of the D/A converter for
the standard AGC gain curve.
0 ~ 255
1 /step
100
This SP mode is for factory use only.
Do not change the value
.
5 *
GA 1 Setting
(GAIN 1)
The coefficient of the D/A converter for
the AGC gain curve at power on.
0 ~ 255
1 /step
100
This SP mode is for factory use only.
Do not change the value
.
8 *
GA 1 Setting
(REF)
The coefficient of the D/A converter for
the AGC gain curve for scanning the
white plate.
0 ~ 255
1 /step
100
This SP mode is for factory use only.
Do not change the value
.
11 *
GA 1 Setting
(Video Data
Path)
Selects one of the following video data outputs, which will
be used for printing.
0. After GA1 functions
1. Before auto shading processing
2. After black auto shading processing
3. After all auto shading processing (black and white)
Do not change the value.
SERVICE PROGRAM MODE TABLES 25 April 1997
22
To Next Page
Loading...
