L
Laura HahnSep 18, 2025
What causes accounting battery error on Ricoh Copier?
- Mmegan50Sep 22, 2025
An accounting battery error on your Ricoh Copier can be caused by a defective accounting device.
To Next PageTo Next Page
What causes accounting battery error on Ricoh Copier?
An accounting battery error on your Ricoh Copier can be caused by a defective accounting device.
Why does my Ricoh Aficio 1515 say 'Cannot sort this size'?
If you see 'Cannot sort this size' on your Ricoh All in One Printer, it means the paper size selected is not available with the Sort function. To fix this, ensure you are using copy paper with a length under 14.01 inches.
How to fix 'Cannot dup. copy this size' error on Ricoh Aficio 1515?
The 'Cannot dup. copy this size' error on your Ricoh All in One Printer means that the selected paper size is not supported by the Duplex function. To resolve this, use one of the following paper sizes: 81/ " × 14"L, 81/ " × 2 2 11"L, 81/ " × 13"L, 81/ " × 2 4 13"L, 81/ " × 14"L.
Why does my Ricoh Printer say 'Cannot sort this size'?
The "Cannot sort this size" error on your Ricoh Printer indicates that the paper size you are using is not available with the Sort function. To resolve this, use copy paper with a length under 357 mm.
What causes IMAC hardware error on Ricoh Copier?
An IMAC hardware error on your Ricoh Copier can be caused by a defective IMAC, a defective BICU, or a loose connection. Check these potential issues.
What causes memory address error on Ricoh Copier?
A memory address error in your Ricoh Copier can be caused by an inconsistency between the BICU firmware and the controller firmware, a defective BICU, or a defective controller. Check these components.
What causes Exposure Lamp Error on Ricoh Copier?
An Exposure Lamp Error on your Ricoh Copier may be due to: * Defective exposure lamp * Defective exposure lamp stabilizer * Defective exposure lamp connector * Unclean scanner mirror * Scanner mirror out of position * Defective SBU board * Defective SBU connector * Lens block out of position * Incorrect position or width of white plate scanning
What causes fusing lamp overheat error on Ricoh Copier?
A fusing lamp overheat error on your Ricoh Copier can be caused by a defective thermistor, incorrect installation of the thermistor, or a defective power supply unit. Check these potential issues.
What causes communication error between BICU and SBU on Ricoh Copier?
A communication error between the BICU and SBU in your Ricoh Copier can arise from: * Loose connection of the flat cable between the BICU and the SBU * Defective flat cable between the BICU and the SBU * Defective BICU * Defective SBU
Why is the main motor error appearing on my Ricoh Copier?
A main motor error on your Ricoh Copier might be due to an overload or a defective main motor. Check these potential causes.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan |
| Print Speed | 15 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 15 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Max Paper Size | A4 |
| Paper Capacity | 250 sheets |
| Memory | 16 MB |
| Interface | USB 2.0 |
| Supported OS | Windows, Mac OS |
Explains warning, caution, and other symbols used for clear communication.
Details critical safety instructions and warnings for operating the machine.
Identifies the locations of warning and caution labels on the machine for user awareness.
Step-by-step instructions for powering on the machine using both switches.
Procedure for safely powering off the machine, including main and operation switches.
Information on how the machine conserves energy through Low Power and Auto Off modes.
Overview of the control panel buttons, indicators, and their basic functions.
Explains the display screen, messages, and initial copy display elements.
Guide on using selection and scroll keys to interact with the machine's display.
Details on recommended original sizes and weights for optimal copying.
Instructions for positioning originals correctly on the exposure glass.
Guidance for feeding originals into the Automatic Document Feeder (ADF).
Steps to specify regular or custom sizes for the originals being copied.
Step-by-step guide to perform a standard copy job.
Instructions for using the bypass tray for special paper types and sizes.
How to lighten or darken the copied image to match the original.
Optimizing copy quality by selecting settings for text or photo originals.
Using preset ratios or custom zoom for scaling copy images.
Assembling copies into sets using the automatic sort feature.
Guide to making two-sided copies from one-sided originals.
Combines two one-sided pages onto one side of a sheet.
Combines four one-sided pages onto two sides of a sheet.
Solutions for messages, non-operation, and memory full errors.
Troubleshooting steps for issues like dirty, light, or blank copies.
Procedures and precautions for loading paper and managing toner.
Step-by-step instructions for replacing toner bottles.
How to enter User Tools and modify default copier settings.
Setting up automatic paper tray selection when paper runs out.
Adjusting settings for different original types to improve copy quality.
Setting original/copy orientation and preferred reduce/enlarge ratios.
Specifying duplex binding margins and priority for reduce/enlarge settings.
Key guidelines and prohibitions for proper machine operation.
Recommendations for ideal placement and environmental factors affecting performance.
Safe procedures for moving the machine and connecting power.
Instructions for cleaning the exposure glass, cover, and ADF for optimal clarity.
Chart indicating which machine functions can be used together.
Paper sizes for bypass tray and available preset reduce/enlarge ratios.
Details on custom zoom, duplex paper requirements, and combine function limits.
