Troubleshooting
40
3
Inserting Toner
• 1: Hold the new bottle horizontally and
shake it from side to side five or six times.
2: Remove the black cap.
Note
❒ Do not remove the black cap before
shaking.
❒ Do not remove the inner cap.
• 3: Put the toner bottle on the holder, and
then pull its top forward.
• 4: Push in the green lever until it clicks.
• 5: Press down the green lever.
• 6: Close the machine's front cover.
ABU035S
ABU036S
StellaC2_GBcopy_F1_pre_FM.book Page 40 Tuesday, December 16, 2003 4:39 PM
To Next Page
Loading...
