To Next PageTo Next Page
What causes developer initialization error on Ricoh Copier?
A developer initialization error on your Ricoh Copier may be caused by: * Defective ID sensor * Insufficient developer * Defective drum operation * Defective development roller operation * Loose connection of the PCU * Insufficient voltage for the charge roller
Why does my Ricoh Aficio 1515 say 'Cannot sort this size'?
If you see 'Cannot sort this size' on your Ricoh All in One Printer, it means the paper size selected is not available with the Sort function. To fix this, ensure you are using copy paper with a length under 14.01 inches.
How to fix 'Cannot dup. copy this size' error on Ricoh Aficio 1515?
The 'Cannot dup. copy this size' error on your Ricoh All in One Printer means that the selected paper size is not supported by the Duplex function. To resolve this, use one of the following paper sizes: 81/ " × 14"L, 81/ " × 2 2 11"L, 81/ " × 13"L, 81/ " × 2 4 13"L, 81/ " × 14"L.
Why does my Ricoh Printer say 'Cannot sort this size'?
The "Cannot sort this size" error on your Ricoh Printer indicates that the paper size you are using is not available with the Sort function. To resolve this, use copy paper with a length under 357 mm.
What to do if I get a 'Size error in Combine mode' on my Ricoh Printer?
The "Size error in Combine mode" on your Ricoh Printer means that the paper size is not available with the Combine function. To fix this, use copy paper with a length under 357 mm.
What causes scanner home position error 1 on Ricoh Copier?
A scanner home position error 1 on your Ricoh Copier can be caused by: * Defective scanner home position sensor * Defective scanner drive motor * Defective scanner home position sensor connector * Defective scanner drive motor connector * Defective BICU board
What causes Exposure Lamp Error on Ricoh Copier?
An Exposure Lamp Error on your Ricoh Copier may be due to: * Defective exposure lamp * Defective exposure lamp stabilizer * Defective exposure lamp connector * Unclean scanner mirror * Scanner mirror out of position * Defective SBU board * Defective SBU connector * Lens block out of position * Incorrect position or width of white plate scanning
What causes fusing lamp overheat error on Ricoh Copier?
A fusing lamp overheat error on your Ricoh Copier can be caused by a defective thermistor, incorrect installation of the thermistor, or a defective power supply unit. Check these potential issues.
What causes communication error between BICU and SBU on Ricoh Copier?
A communication error between the BICU and SBU in your Ricoh Copier can arise from: * Loose connection of the flat cable between the BICU and the SBU * Defective flat cable between the BICU and the SBU * Defective BICU * Defective SBU
Why is the main motor error appearing on my Ricoh Copier?
A main motor error on your Ricoh Copier might be due to an overload or a defective main motor. Check these potential causes.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Copy, Scan |
| Print Speed | 15 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 15 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Max Paper Size | A4 |
| Paper Capacity | 250 sheets |
| Memory | 16 MB |
| Interface | USB 2.0 |
| Supported OS | Windows, Mac OS |
