Why is my Ricoh Aficio MP 1600L2 showing a self-diagnostic error: CPU?
If your Ricoh All in One Printer displays a self-diagnostic error for the CPU, it could be caused by a defective controller board. Try downloading the controller firmware again.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a polygonal mirror motor error?
If your Ricoh All in One Printer displays a polygonal mirror motor error, it could be caused by a defective polygon mirror motor, a poor connection between the polygonal mirror motor driver and the BICU board, a damaged cable between BICU and polygonal mirror motor driver, or a defective BICU board.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a laser synchronization error?
If your Ricoh All in One Printer displays a laser synchronization error, it may be due to a poor connection between the LD unit and the BICU board, a damaged cable between BICU and LD unit, an LD unit out of position, a defective LD unit, or a defective BICU board.
Why is my Ricoh All in One Printer showing an unexpected software error?
If your Ricoh All in One Printer displays an unexpected software error, the software may be defective, or an error undetectable by any other SC code occurred.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a self-diagnostic error: ASIC?
If your Ricoh All in One Printer displays a self-diagnostic error for the ASIC, it may be due to a defective controller board.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a printer error?
If your Ricoh All in One Printer displays a printer error, it could be caused by a defective printer application program or an incorrect hardware configuration (including memory shortage).
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing an accounting error 2?
If your Ricoh All in One Printer displays an accounting error 2, it may be due to a defective accounting device or a loose connection.
Why is my Ricoh Aficio MP 1600L2 showing an accounting RAM error?
If your Ricoh All in One Printer displays an accounting RAM error, it could be caused by a defective accounting device.
What causes Image transfer error in Ricoh Aficio MP 1600L2 All in One Printer?
An image transfer error in your Ricoh All in One Printer can be caused by a defective BICU board or a defective controller board.
Why is my Ricoh Aficio MP 1600L2 showing a TD sensor initial setting error?
If your Ricoh All in One Printer displays a TD sensor initial setting error, it could be due to an ID sensor defective, no developer, the drum does not turn, the development roller does not turn, a poor connection of the PCU, or the voltage is not applied to charge roller.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Speed | 16 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max Paper Size | A4 |
| Connectivity | USB 2.0 |
| Dimensions | 550 x 568 x 420 mm |
| Monthly Duty Cycle | 15, 000 pages |
| Type | Monochrome Laser |
| Paper Size | A4, A5, B5 |
| Memory | 16 MB |
To Next Page