Why is my Ricoh All in One Printer showing a transfer roller leak error 1?
If your Ricoh All in One Printer displays a transfer roller leak error 1, it could be caused by a defective high voltage supply board, a poor connection of the PCU, an incorrectly set transfer/separation unit, or a damaged transfer roller.
Why is my Ricoh Aficio MP 1600L2 showing a transfer roller leak error 2?
If your Ricoh All in One Printer displays a transfer roller leak error 2, it may be due to a defective high voltage supply board, a poor connection of the PCU, an incorrectly set transfer/separation unit, or a damaged transfer roller.
Why is my Ricoh Aficio MP 1600L2 showing a TD sensor error?
If your Ricoh All in One Printer displays a TD sensor error, it could be due to a TD sensor abnormality or a poor connection of the PCU.
Why is my Ricoh Aficio MP 1600L2 showing a TD sensor initial setting error?
If your Ricoh All in One Printer displays a TD sensor initial setting error, it could be due to an ID sensor defective, no developer, the drum does not turn, the development roller does not turn, a poor connection of the PCU, or the voltage is not applied to charge roller.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a jam error detected 3 times in succession?
If your Ricoh All in One Printer displays a jam error detected 3 times in succession, possible causes include dampness, paper curl, incorrect paper setting in the paper tray, or stripper pawls coming apart.
What causes Communication Error between BICU and SBU in Ricoh All in One Printer?
A communication error between the BICU and SBU in your Ricoh All in One Printer can arise from: * A poor connection of the flat cable between the BICU board and the SBU. * Damage to the flat cable between the BICU board and the SBU. * A defective BICU board. * A defective SBU.
Why is my Ricoh Aficio MP 1600L2 showing a main motor lock?
If your Ricoh All in One Printer displays a main motor lock error, it could be due to too much load on the drive mechanism or a defective main motor.
Why is my Ricoh Aficio MP 1600L2 showing a rear exhaust fan motor error?
If your Ricoh All in One Printer displays a rear exhaust fan motor error, it may be due to a loose connection of the exhaust fan motor or too much load on the motor drive.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a communication error between BICU and ADF?
If your Ricoh All in One Printer displays a communication error between BICU and ADF, it could be caused by a poor connection between the BICU and ADF main board (DF connector), a defective ADF main board, or a defective BICU.
Why is my Ricoh Aficio MP 1600L2 showing an ADF connection error?
If your Ricoh All in One Printer displays an ADF connection error, it may be due to an incorrect ADF (The ADF for B039/B040/ B043 or B121/B122/B123 is installed on a B244/B268/B269/B276/B277.) or the connector of the ADF is removed while the machine is in the energy saver mode.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Speed | 16 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max Paper Size | A4 |
| Connectivity | USB 2.0 |
| Dimensions | 550 x 568 x 420 mm |
| Monthly Duty Cycle | 15, 000 pages |
| Type | Monochrome Laser |
| Paper Size | A4, A5, B5 |
| Memory | 16 MB |
To Next Page