Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a program download error?
If your Ricoh All in One Printer displays a program download error, it could be caused by a board installed incorrectly, a defective BICU board, a defective controller board, an IC card defective, NVRAM defective, or loss of power during downloading.
What causes SBU white/black level correction error in Ricoh Aficio MP 1600L2 All in One Printer?
An SBU white/black level correction error in your Ricoh All in One Printer can be caused by: * A defective exposure lamp. * A dirty white plate. * Incorrect position or width of white plate scanning (SP4015). * A defective BICU board. * A defective SBU board.
What causes Automatic SBU adjustment error in Ricoh Aficio MP 1600L2 All in One Printer?
An automatic SBU adjustment error in your Ricoh All in One Printer may be due to: * A defective exposure lamp. * A dirty white plate. * Incorrect position or width of white plate scanning (SP4015). * A defective BICU board. * A defective SBU board.
What causes Image transfer error in Ricoh Aficio MP 1600L2 All in One Printer?
An image transfer error in your Ricoh All in One Printer can be caused by a defective BICU board or a defective controller board.
Why is my Ricoh Aficio MP 1600L2 showing a left exhaust fan motor error?
If your Ricoh All in One Printer displays a left exhaust fan motor error, it could be caused by a loose connection of the exhaust fan motor or too much load on the motor drive.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a polygonal mirror motor error?
If your Ricoh All in One Printer displays a polygonal mirror motor error, it could be caused by a defective polygon mirror motor, a poor connection between the polygonal mirror motor driver and the BICU board, a damaged cable between BICU and polygonal mirror motor driver, or a defective BICU board.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing a laser synchronization error?
If your Ricoh All in One Printer displays a laser synchronization error, it may be due to a poor connection between the LD unit and the BICU board, a damaged cable between BICU and LD unit, an LD unit out of position, a defective LD unit, or a defective BICU board.
Why is my Ricoh Aficio MP 1600L2 All in One Printer showing an NVRAM error?
If your Ricoh All in One Printer displays an NVRAM error, the cause may be a defective NVRAM, a poor connection between the BICU and NVRAM, the NVRAM is not connected, or a defective BICU.
Why is my Ricoh Aficio MP 1600L2 showing a charge roller current leak?
If your Ricoh All in One Printer displays a charge roller current leak, it could be caused by a damaged charge roller, a defective high voltage supply board, or a poor connection of the PCU.
Why is my Ricoh Aficio MP 1600L2 showing a development bias leak?
If your Ricoh All in One Printer displays a development bias leak, it may be due to a poor connection of the PCU or a defective high voltage supply board.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Speed | 16 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max Paper Size | A4 |
| Connectivity | USB 2.0 |
| Dimensions | 550 x 568 x 420 mm |
| Monthly Duty Cycle | 15, 000 pages |
| Type | Monochrome Laser |
| Paper Size | A4, A5, B5 |
| Memory | 16 MB |
To Next Page